notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 2 TMP40-6FT-KMKM+ 50 ? 6ft dc to 40 ghz test cable rev. or m166076 TMP40-6FT-KMKM+ ag/cp/am 180521 typical performance data frequency (mhz) insertion loss (db) return loss (db) 2.92mm male 2.92mm male t e s t f l e x ? case style: rj2516-6 *k connector is a trademark of anritsu custom sizes available, consult factory. b c d e f wt feet meters 0.42 .312 0.42 .312 .142 inch mm grams 6.00 1.83 10.7 7.92 10.7 7.92 3.6 +.72/-0 +18.3/-0 89 t a 100 0.22 47.0 40.8 2000 0.97 37.5 41.6 4000 1.37 34.1 34.6 6000 1.67 33.0 34.1 10000 2.16 35.7 35.9 15000 2.65 30.5 37.3 18000 2.91 41.4 36.5 20000 3.08 30.1 31.5 26500 3.60 24.5 25.7 28000 3.69 30.8 33.4 30000 3.83 27.1 32.7 32000 3.98 26.1 30.6 36000 4.23 23.9 32.3 38000 4.36 23.3 24.2 40000 4.44 31.8 36.1 outline dimensions ( ) inch mm features ? useful over temperature range, -55c to 105c ? low insertion loss ? stainless steel 40 ghz connector for long mating-cycle life ? triple shield cable for excellent shielding effectiveness ? good amplitude and phase stability vs fexing over frequency ? 40 ghz connector mates with 2.92 mm, k*, 3.5mm, sma applications ? military and defense applications ? research & development labs ? environmental & temperature test chambers electrical specifcations at 25c parameter condition (ghz) min. typ. max. units frequency range dc 40 ghz length 6 ft insertion loss dc - 6 1.7 2.0 db 6 - 18 3.0 3.5 18 - 26.5 3.7 4.3 26.5 - 40 4.6 5.5 return loss dc - 6 20 23 db 6 - 18 17 22 18 - 26.5 16 18 26.5 - 40 15 17 maximum ratings operating temperature -55c to +105c storage temperature -55c to +125c power handling at 25c, 102w at 6 ghz sea level 57w at 18 ghz 47w at 26.5 ghz 37w at 40 ghz permanent damage may occur if any of these limits are exceeded. connectors model 2.92mm male TMP40-6FT-KMKM+ outline drawing cable construction center conductor: solid spc dielectric: ld-ptfe outer shield: spc braid fep (gray) outer conductor: spc strip product guarantee mini-circuits ? will repair or replace your test cable at its option if the connector attachment fails within six months of shipment. this guarantee excludes cable or connector interface damage from misuse or abuse. * typical phase change over fexure performed on tmp40-3ft-kmkm+ by wrapping cable 360 around 2" and 3" radii mandrels referenced to normalized straight position. ** setup is fipped and measurement is repeated. 0.0 1.0 2.0 3.0 4.0 5.0 0 5000 10000 15000 20000 25000 30000 35000 40000 insertion loss (db) frequency (mhz) tmp40 - 6ft - kmkm+ insertion loss 10 20 30 40 50 60 0 5000 10000 15000 20000 25000 30000 35000 40000 return loss (db) frequency (mhz) tmp40 - 6ft - kmkm+ return loss 2.92mm male 2.92mm male -1 0 1 2 3 4 5 0 10000 20000 30000 40000 phase change (degrees) frequency (mhz) typical phase vs flexure* 2" left** 2" right 3" left 3" right +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 2 TMP40-6FT-KMKM+ typical performance vs. temperature* frequency (mhz) insertion loss (db) input return loss (db) output return loss (db) -55c +25c +105c -55c +25c +105c -55c +25c +105c 100 0.09 0.11 0.12 38.6 39.3 39.6 41.2 41.6 41.6 3000 0.47 0.62 0.69 33.7 34.8 35.4 34.0 35.2 35.6 4000 0.55 0.71 0.80 32.8 33.6 33.2 32.5 33.0 32.9 6000 0.67 0.87 0.97 27.0 27.7 28.9 26.8 27.4 28.4 10000 0.83 1.10 1.24 30.5 30.0 28.9 29.5 28.8 28.1 15000 1.01 1.36 1.54 45.8 47.1 43.5 35.3 35.7 33.8 18000 1.08 1.47 1.68 29.4 31.1 29.1 25.3 26.9 25.8 20000 1.13 1.54 1.77 25.0 26.8 30.8 24.3 26.0 28.8 26000 1.31 1.82 2.09 30.9 29.5 31.0 26.0 24.3 26.4 28000 1.38 1.91 2.19 24.9 25.4 25.8 23.2 22.9 24.2 30000 1.42 1.96 2.27 26.4 25.9 25.4 30.8 32.3 28.0 32000 1.53 2.08 2.36 18.7 19.9 26.2 18.1 19.7 23.2 36000 1.60 2.21 2.61 24.3 25.3 18.4 21.2 21.9 17.6 38000 1.63 2.26 2.62 23.1 26.0 24.0 20.3 22.7 21.0 40000 1.76 2.40 2.73 20.0 22.5 24.6 15.9 17.2 20.2 0 10 20 30 40 50 0 5000 10000 15000 20000 25000 30000 35000 40000 return loss (db) frequency (mhz) input return loss vs. temperature -55c +25c +105c 0 10 20 30 40 50 0 5000 10000 15000 20000 25000 30000 35000 40000 return loss (db) frequency (mhz) output return loss vs. temperature -55c +25c +105c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 5000 10000 15000 20000 25000 30000 35000 40000 insertion loss (db) frequency (mhz) insertion loss vs. temperature -55c +25c +105c * typical performance over temperature performed on tmp40-3ft-kmkm+.
|
